Section: 9IDS X64 Installer Manual 700-398-02D Issued August 2010 41Table 21: Phone Number ExampleData entered Explanation[INSTALLER CODE][*] To enter program mode[5][1][*] To enter location 51 (phone number 1)[0] To dial the zero[MODE][5] This programmes the 4 second pause[0][3][1] This enters the area code[7][0][5][1][3][7][3] The remainder of the number[*] To program the number[#] To exit installer menuRefer to Figure 2 to see how telephone numbers work.Figure 2: How Telephone Numbers WorkLOCATION 50 Call-back Telephone NumberThe phone number programmed into this location will be used to respond to a call-backrequest from the IDS download software/PC. (This is an advanced location).Option 4 in location 48 (Download Options) must be enabled for the call-back telephone number to havean effect.[INSTALLER CODE] [*] [5] [0] [*] [CALL-BACK NUMBER] [*]LOCATION 51 Telephone Number 1Program this location to set the primary telephone number. A maximum of 24-digits can beentered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]key.[INSTALLER CODE] [*] [5] [1] [*] [TELEPHONE NUMBER 1] [*]LOCATION 52 Telephone Number 2Program this location to set the secondary telephone number. A maximum of 24-digits can beentered. Enter the digits consecutively and after the last digit has been entered, terminate with the [*]key.
