IDS X64 Installer Manual
Also see for X64: Training manualUser manualUser manualInstaller manualManual
                                                                                                | |
Contents
| 
IDS X64 Installer Manual 700-398-02D Issued August 2010 95Programming Quick Reference GuideEntering Program Mode [#] [INSTALLER CODE] [*] to enter program mode. A long beep will confirm entry. The READY LED will flash.Programming Standard Locations The panel is in program mode – the READY LED is flashing. [LOCATION NUMBER] [*] The READY LED is solid on, and the AWAY LED will flash. Either [NEW DATA] [*] or [#] to exit. If data is entered, a long beep will confirm entry. In both instances, the READY LED will to flash and the AWAY LED will turn off. [#] to exit. The READY LED will stop flashing. The panel is now in standby mode.Programming Extended Locations with Strings Panel is in program mode – the READY LED is flashing. [LOCATION NUMBER] [*] The READY LED is solid on, and the ARM and AWAY LEDs will flash. [STRING] [*] The ARM and AWAY LEDs turn off, and the READY LED will flash. If you do not want to change data press [#]. The READY LED will continue to flash, whilst the ARM and AWAY LEDs turn off. [#] to exit. The READY LED will stop flashing. The panel is now in standby mode.Programming Extended Locations with Sub-locations Panel is in program mode – the READY LED is flashing. [LOCATION NUMBER] [*] The READY LED is solid on, and the ARM and AWAY LEDs will flash. [SUB-LOCATION NUMBER] [*] The READY and ARM are solid on, and AWAY is flashing. [NEW DATA] [*] The READY LED is solid on, and the ARM and AWAY LEDs will flash. [#] if you do not wish to make changes. The READY is flashing, and the ARM and AWAY LEDs turn off. [#] to exit current location. The READY is flashing, and the ARM and AWAY LEDs turn off. [#] to exit. The READY LED will stop flashing. The panel is now in standby mode.Programming a Bitmapped Location Panel is in program mode – the READY LED is flashing. [LOCATION NUMBER] [*] The READY LED is solid, and the AWAY LED flashes. [#] to exit current location. READY is flashing. [#] to exit. The READY LED will stop flashing. The panel is now in standby mode. |
Related manuals for IDS X64
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine