qwiR20■ VFO mode selectionPOCKET GUIDEPush[VFO MHz] momentarily toselect VFO mode.➥■ Receive mode selectionPush[MODE SCAN] severaltimes to select the desired mode.➥■ Audio level settingRotate[L-DIAL] (or push[Y]/[Z]) to set the audio level.➥■ Squelch level settingWhile pushing[SQL], rotate[R-DIAL] to set the squelch level.➥■ Frequency band selectionPush[BAND] several times, orwhile pushing[BAND], rotate[R-DIAL] to select the desired fre-quency band.➥■ Tuning step selectionPush[9 TS], then rotate[R-DIAL]to select the desired tuning step.• Push[9 TS] again to return to theprevious condition.➥■ Key lock functionPush[• LOCK] for 1 sec. to togglethe key lock function ON and OFF.• “ ” appears when the lock functionis in use.➥■ Frequency settingPush[VFO MHz] to select VFOmode.Rotate[R-DIAL] to set the de-sired operating frequency.• Entering keypad directly can beselected the desired frequency.qw■ Memory channel selectionPush[MR S.MW] to selectmemory mode.Rotate[R-DIAL] to set the de-sired memory channel.• Entering keypad directly can beselected the desired channel.qwe■ Memory bank channel selectionPush[MR S.MW] to selectmemory mode.Push[BAND] several times, orwhile pushing[BAND], rotate[R-DIAL] to select the desired bank.Rotate[R-DIAL] to select thedesired bank channel.■ Attenuator functionPush[ΩΩATT] to toggle theattenuator ON and OFF.• “ATT” appears when the attenuatoris in use.➥■ Memory mode selectionPush[MR S.MW] momentarily toselect memory mode.➥ ■ Single band and dualwatch selectionPush[DUALWATCH] for 1 sec. totoggle between single band anddualwatch operation.➥9218POCKET GUIDEImportant operating instructions are summed up in this and the followingpage for your simple reference.By cutting along the line and folding on the dotted line, it will become a cardsized operating guide which can easily be carried in a card case or wallet,etc.q Cut w Fold e Complete