Icom IC-R20 Instruction Manual

Also see for IC-R20: Price list Instruction manual Service manual Service manual

Contents

Icom IC-R20 Instruction Manual Manual pdf 52 page image

397 SCAN OPERATIONMemory channels can be set to be skipped for memory skipscan. In addition, memory channels can be set to be skippedfor both memory skip scan and frequency skip scan. Theseare useful to speed up the scan interval.q Select a memory channel:➥ Push [MR S.MW] to select memory mode.➥ Rotate [R-DIAL] to select the desired channel to be askip channel/frequency.wPush [MR S.MW] for 1 sec. to enter the select memorywrite condition.e Push [8 SET] several times to select “SKIP.”• While pushing [8 SET], rotating [R-DIAL] can also select “SKIP.”rRotate [R-DIAL] to select the skip condition from “SKIP,”“PSKIP” or “OFF” for the selected channel.• PSKIP : The channel is skipped during memory/bank scan andthe programmed frequency is skipped during VFO scan,such as programmed scan.• SKIP : The channel is skipped during memory or bank scan.• OFF : The channel or programmed frequency is scanned dur-ing any scan.tPush [MR S.MW] for 1 sec. to store the skip condition intothe memory.• “SKIP” or “PSKIP” indicator appears, according to the skip se-lection in the step r.✔ CONVENIENT!Also the skip setting can be set with the following operationfor easy setting.qSelect the desired memory channel to be set as a skipchannel/frequency.wWhile pushing [5 SKIP], rotate [R-DIAL] to select the skipcondition from “PSKIP,” “SKIP” and “OFF (no indication) .”ATTB:GROUP1√ μMODE ANLAFCTSQLFM145 700PSKIP-DUP003ATTB:GROUP1√ μMODE ANLAFCTSQLFM145 700PSKIP-DUP033• Skip channel setting • Program skip setting“SKIP” appears“PSKIP” appearsFM>CLEAR-SKIP-:OFF-MNAME:-BNAME:>CLEAR>SKIP-:OFF-MNAME:-BANK-:----012μ.146. 010is pushedseveral times.After[R-DIAL]SET8SET8MRS.MW■ Skip channel/frequency setting