417 SCAN OPERATIONDD Scan resume timerThe scan restarts after the signal disappears according to theresume time. It can be set from 0–5 sec. or unlimited.q Push [8 SET] for 1 sec. to enter set mode.wRotate [R-DIAL] to select “SET EXPAND,” then push[8 SET].eRotate [R-DIAL] to turn the expand set mode selectionON, then push [8 SET].rRotate [R-DIAL] to select “SCAN RESUME,” then push[8 SET].tRotate [R-DIAL] to set the desired scan resume timer from0–5 sec. (1 sec. steps) and “HOLD.”• “0SEC” : Scan restarts immediately after the signal dis-appears.• “1SEC”–“5SEC” : Scan restarts 1–5 sec. after the signal disap-pears.• “HOLD” : Scan restarts by rotating [R-DIAL] only.y Push [DUALWATCH] to exit set mode.***-SET-MODE-***-SCAN-STOP-BEEP>SCAN-RESUME-SCAN-PAUSE----------------SCAN-RESUME-5SEC>4SEC-3SEC-2SEC-1SEC-0SEC----------------[R-DIAL]DUALWATCHSET8
