214 BASIC OPERATION■ AFC functionThe AFC (Automatic Frequency Control) function tunes thedisplayed frequency automatically when an off-center fre-quency is received. It activates in FM/WFM modes only withsingle band operation.➥ Push [0 AFC] to toggle the AFC function ON and OFF.• “AFC” appears when the AFC function is in use.NOTE: The AFC function is not available during dualwatchoperation.■ NB/ANL functionThe NB (noise blanker) function removes pulse-type noisewhen USB, LSB or CW mode is selected. The ANL (Auto-matic Noise Limitter) function reduces noise componentswhen AM mode is selected.See page 22 for setting details.NOTE: No display indication appears during dualwatch op-eration, but both functions are active while in specificmodes.√MODE ANLAFCTSQLAM51 100PSKIP-DUP√MODE NBAFCTSQLUSB145 100PSKIP-DUP“NB” appears while theNB function is in use.“ANL” appears while theANL function is in use.ATT√MODE ANLAFCTSQLFM1260 000PSKIP-DUPDIAL.SEL SWEEP CENTERT-SCAN SKIP M.NTONE SET TSATT RF GAIN IC Recorder1 2 34 5 6 07 8 9BANDDUALWATCH MAIN/SUB POWERVFOMHz MODESCAN MRS.MWSCOPELOCKRECAFC“AFC” appears while theAFC function is in use.0 AFC“ ” “ ”oran off-frequency is received.appears when
