357 SCAN OPERATION■ Full/band/programmed scanq Select VFO mode with [VFO MHz].• Select the desired frequency band with [BAND], if desired.w Set the squelch level.eWhile pushing and holding [MODE SCAN], rotate [R-DIAL]to select the desired scanning type.• “ALL” for full scan; “BAND” for band scan, “PROG-xx” for pro-grammed scan (xx= 0 to 24; programmed scan edges numbersonly displayed)r To start the scan, release [MODE SCAN].• Scan pauses when a signal is received.• Rotate [R-DIAL] to change the scanning direction, or resumesmanually.• Push [DUALWATCH] again to stop the scan.About the scanning steps: The selected tuning step ineach frequency band (in VFO mode) is used during scan.√MODE ANLAFCTSQLFM148 800PSKIP-DUP√MODE ANLAFCTSQLFM148 800PSKIP-DUPP01• During full/band scan • During programmed scanSCAN:ALL√MODE ANLAFCTSQLFM146 010PSKIP-DUPSCAN:BAND√ PSKIPSCAN:PROG-01√ PSKIP• Full scan selection• Band scan selection• Programmed scan selectionSelectable between “ 00” to “24”if programmed[R-DIAL]VFOMHzMODESCAN
