407SCAN OPERATIONDD Scan pause timerThe scan pauses when receiving signals according to thescan pause time. It can be set from 2 to 20 sec. or unlimited.q Push [8 SET] for 1 sec. to enter set mode.wRotate [R-DIAL] to select “SET EXPAND,” then push[8 SET].eRotate [R-DIAL] to turn the expand set mode selectionON, then push [8 SET].rRotate [R-DIAL] to select “SCAN PAUSE,” then push[8 SET].tRotate [R-DIAL] to set the desired scan time to pause from2–20 sec. (2 sec. steps) and “HOLD,” then push [8 SET].• “2SEC”–“20SEC”: Scan pauses for 2–20 sec. while receiving asignal.• “HOLD” : Scan pauses on a received a signal until itdisappears.y Push [DUALWATCH] to exit set mode.***-SET-MODE-***-SCAN-RESUME>SCAN-PAUSE-AUTO-POWER-OFF----------------SCAN-PAUSE-12SEC>10SEC-8SEC-6SEC-4SEC-2SEC----------------[R-DIAL]DUALWATCHSET8■ Scan resume condition IN EXPANDED SET MODE7
