Icom IC-R20 Instruction Manual
Also see for IC-R20: Price listInstruction manualService manualService manual
                                                                                                            | |
Contents
| 
163FREQUENCY AND CHANNEL SETTING3■ Receive mode selectionReceive modes are determined by the physical properties ofthe radio signals. The receiver has 6 receive modes: FM,WFM, AM, LSB, USB and CW modes. The mode selection isstored independently in each band and memory channels.Typically, AM mode is used for the AM broadcast stations(0.495–1.620 MHz) and VHF air band (118–135.995 MHz),and WFM is used for FM broadcast stations (76–107.9 MHz).➥ Push [MODE SCAN] momentarily several times to selectthe desired receive mode.■ Lock functionTo prevent accidental frequency changes and unnecessaryfunction access, use the lock function.➥ Push [• LOCK] for 1 sec. to turn the lock function ON andOFF.• “ ” appears while the lock function is activated.• The squelch control and volume control can be used while thelock function is in use with default setting. Either or both thesquelch control and volume control can also be locked in setmode. (p. 49)√MODE ANLAFCTSQLFM146 010PSKIP-DUPDIAL.SEL SWEEP CENTERT-SCAN SKIP M.NTONE SET TSATT RF GAIN IC Recorder1 2 34 5 6 07 8 9BANDDUALWATCH MAIN/SUB POWERVFOMHz MODESCAN MRS.MWSCOPELOCKRECAFC“ ” appears while thelock function is in use.LOCKDIAL.SEL SWEEP CENTERT-SCAN SKIP M.NTONE SET TSATT RF GAIN IC Recorder1 2 34 5 6 07 8 9BANDDUALWATCH MAIN/SUB POWERVFOMHz MODESCAN MRS.MWSCOPELOCKRECAFCMODESCANWFMMODEAMMODEFMMODE76 000118 000146 010PSKIPPSKIPPSKIPFM modeAM modeWFM mode |
Related manuals for Icom IC-R20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine