Icom IC-R20 Instruction Manual

Also see for IC-R20: Price list Instruction manual Service manual Service manual

Contents

Icom IC-R20 Instruction Manual Manual pdf 42 page image

296 MEMORY CHANNELS■ Programming memory/bank nameEach memory channel can be programmed with an alphanu-meric channel name for easy recognition and can be indicatedindependently by channel. Names can be a maximum of 8characters.q Push [MR S.MW] to select memory mode.w Rotate [R-DIAL] to select the desired memory channel.ePush [MR S.MW] for 1 sec. to select the select memorywrite condition.• 1 short and 1 long beep sound.• “μμ ” indicator blinks.rWhile pushing [8 SET], rotate [R-DIAL] to select “BNAME”or “MNAME” when programming the memory name or thebank name, respectively.• The item can also be selected by pushing [8 SET] several times.• After selecting the memory or bank name programming condi-tion, a cursor blinks for the first digit.tRotate [R-DIAL] to select the desired character.• The selected character blinks.• While pushing [6 M.N], rotate [R-DIAL] to select the charactergroup.yWhile pushing [BAND], rotate [R-DIAL] to move the cur-sor to left or right.• Push [BAND] to move the cursor to right.uRepeat steps t and y until the desired 8-character chan-nel names are displayed.iPush [MR S.MW] for 1 sec. to program the name and exitthe channel name programming condition.• 3 beeps sound.NOTE: Only one bank name can be programmed intoeach bank. Therefore, the previously programmed bankname will be displayed when bank name indication is se-lected. Also, the programmed bank name is assigned forthe other bank channels automatically.FM-MNAME:-BANK-:C-11012μ.145 .700FM>MNAME:Ric>BNAME:>BNAME:GRO -BANK-:C-11012μ.145 .700Bank name Memory nameFM-MNAME:>BNAME:-BANK-:C-11012μ.145.700FM>MNAME:>BNAME:-BANK-:C-11012μ.145 .700Memory name selectionBank name selectionFM>BANK-:C-11012μ.145.700