Icom IC-R20 Instruction Manual

Also see for IC-R20: Price list Instruction manual Service manual Service manual

Contents

Icom IC-R20 Instruction Manual Manual pdf 73 page image

6011OTHER FUNCTIONS■ Antenna selectionThe IC-R20 has an internal bar antenna installed for receivingAM broadcast band (0.495–1.620 MHz; differ according to version)signals. In addition, the connected earphone’s cable can beused as an antenna for receiving FM broadcast band(76.000–107.995 MHz; differ according to version) signals.DD Selecting antennaq Push [8 SET] for 1 sec. to enter set mode.wRotate [R-DIAL] to select “AM ANTENNA” or “FM AN-TENNA” for AM broadcast band or FM broadcast band, re-spectively.eAfter pushing [8 SET], rotate [R-DIAL] to select “BAR”when “AM ANTENNA” is selected for the AM broadcastband; select “EARPHONE” when “FM ANTENNA” is se-lected for the FM broadcast band.r Push [DUALWATCH] to exit set mode.NOTES:• Some noise or spurious may be received when the inter-nal bar or earphone cable is used for antenna.• The supplied or third party’s antenna MUST BE con-nected to the antenna connector to receive signals otherthan AM or FM broadcast bands.• When receiving an AM broadcast signal with internal barantenna, aim the receiver to better audio direction.• When the internal bar or earphone cable is used for anantenna, the attenuator function cannot be used.>BAR-EXT----------------AM-ANTENNA>EARPHONE-EXT----------------FM-ANTENNABar antenna selection for0.495–1.620 MHz bandEarphone cable selection for76.000–107.995 MHz band***-SET-MODE-***-BAR>EXT----------------AM-ANTENNA-SET-EXPAND-FM-ANTENNA>AM-ANTENNA-AF-FILTER-ANL-NOISE-BLANKER----------------[R-DIAL]DUALWATCHSET81011