Icom IC-R20 Instruction Manual

Also see for IC-R20: Price list Instruction manual Service manual Service manual

Contents

Icom IC-R20 Instruction Manual Manual pdf 44 page image

316 MEMORY CHANNELS■ Copying memory contentsThis function transfers a memory channel’s contents to VFO(or another memory channel). This is useful when searchingfor signals around a memory channel frequency and for re-calling the offset frequency, subaudible tone frequency etc.D Memory➪VFOq Select the memory channel to be copied.➥ Push [MR S.MW] to select memory mode, then rotate[R-DIAL] to select the desired memory channel.• Select the bank channel with [BAND] and [R-DIAL], if desired.wPush [MR S.MW] for 1 sec. to select the select memorywrite condition.• 1 short and 1 long beep sound.• “μμ ” indicator blinks.e Push [VFO MHz] to select “VFO.”• Rotate [R-DIAL] can also select “VFO.”rPush [MR S.MW] for 1 sec. to write the selected channelcontents to VFO mode.• Returns to VFO mode automatically.Pushing [MR S.MW] for 2 sec. at the step w, will alsocopy the memory contents to VFO. In this case, the stepse and r are not necessary.D Memory➪memoryq Select the memory channel to be copied.➥ Push [MR S.MW] to select memory mode, then rotate [R-DIAL] to select the desired memory channel.wPush [MR S.MW] for 1 sec. to select the select memorywrite condition.• 1 short and 1 long beep sound.• “μμ ” indicator blinks.• Do not hold [MR S.MW] for more than 1 sec. otherwise thememory contents will be copied to VFO.e Rotate [R-DIAL] to select the target memory channel.r Push [MR S.MW] for 1 sec. again to copy.[EXAMPLE]: Copying channel 20 to 51.√ μMODE ANLAFCTSQLTSQLFMFMFM145 870PSKIP-DUP-DUP TSQLTSQL-DUP-DUP020 √ μMODE ANLAFCTSQLTSQLFM145 870PSKIP-DUP-DUP051>CLEARCLEAR-SKIPSKIP-:OFF:OFF-MNAME:MNAME:-BNAME:-BNAME:-BANKBANK-:----:----020020μ.145 .870FM>CLEARCLEAR-SKIPSKIP-:OFF:OFF-MNAME:MNAME:-BNAME:-BNAME:-BANKBANK-:----:----051051μ.--------------------------------Select memorychannel Push for 1 sec. RotateMRS.MWMRS.MW Push for 1 sec.MRS.MW