5-20 Installing the Operating System with Express SetupInstalling Disk Array Controller Driver (N8103-81F)To additionally install the N8103-81F in a system containing Windows Server 2003, connect thecontroller and take the following steps to install the driver:1. Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→ [Computer Management].2. Double-click [LSI Logic Megaraid SCSI 320-2] which Device Manager lists.3. Click the [Driver] tab and click [Update Driver...].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select the "Search for the best driver in these locations." and check the "Search removablemedia [floppy, CD-ROM...]" check box.6. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, and click [Next].7. Copying of the driver is completed, and the [Completing the Hardware Update Wizard]dialog box below appears. Click [Finish].Graphics Accelerator DriverStandard graphics accelerator drivers that are mounted will be installed automatically. Thefollowing is the procedure when it is necessary to install manually.If you want to utilize optional Graphics Accelerator Driver board, follow the document attached tothe board to install the driver.1. Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].3. Run "SETUP.EXE" in the following directory.:\WINNT\DOTNET\VIDEO\SETUP.EXE.4. Follow the message to continue the installation.If the dialog message "Digital Signature could not been found." appears, select [Yes] tocontinue.5. Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive, follow thedirection on the screen and restart the system.
