Troubleshooting 8-65Saving the Dump FilePress the DUMP switch to save the dump file when an error occurs. Insert a metal pin (astraightened large paper clip will make a substitute) into the switch hole to press the DUMP switch.Pressing the DUMP switch saves the dump file in the specified directory. (Memory dumping maynot be available when the processor stalls.)IMPORTANT: Do not use a toothpick or plastic stick that is easy tobreak. Use a pin having the length of 1 inch (25 mm) or longer.Recovery for Windows Server 2003 x64 Editions andWindows Server 2003If the system fails to start by some reasons, recover the system with the recovery console. However,recovery using this method should be performed only by system administrator or a user who has anexpert knowledge. See Online Help for details.DUMP switch25 mm or longer
