E-2 Installing Windows Server 2003Updating SystemIf you modified the Windows system, execute "Update the System" in Master Control Menu.Re-installing to the Hard Disk which has been upgraded to DynamicDiskIf you want to leave the existing partition when installing the system on the hard disk upgraded toDynamic Disk, note the following issue: Do not select the partition that OS had been installed as the partition to install the OSnewly. Select "Use the current File System" for the format of OS partition.MO DeviceIf you specify the file system as NTFS with MO Device connected during the installation, the filesystem will not be converted normally. Disconnect MO Device and restart the installation fromthe beginning.Media such as DATDuring the OS installation, do not attach the unnecessary media for OS installation to the system,such as DAT.About the Upgrade to Windows Server 2003 R2The "in-place upgrade" from Windows Server 2003 to Windows Server 2003 R2 is notrecommended because it may overwrite any files or registries, and cause unexpected impact to thesystem or the applications.If you install Windows Server 2003 R2, backup user data referring "Windows Server 2003 CleanInstallation", and reinstall Windows Server 2003 R2.NOTE: "in-place upgrade" is to perform overwrite upgrade fromWindows Server 2003 which already installed to Windows Server 2003R2.
