Troubleshooting 8-5STATUS lampindication Description ActionUnlit The server is off-powered. Power on the server.POST is in progress. Wait for a while. The STATUS lamp will light in afew seconds after POST completion.A processor error occurred(IERR).A processor thermal errorwas detected. (Thermal-Trip)Cycle power to the server. If POST displays anerror message, take a note on the message andcontact your service representative.A watchdog timer has timedout.A PCI system error occurred.A PCI parity error occurred.An uncorrectable memoryerror was detected.An uncorrectable bus errorwas detected.POST terminates with error.Memory dumping isrequested.Wait until memory dumping completes.Lit in amber A thermal error (critical) wasdetected.Check internal fans for dust or debris. Alsomake sure that the fans are firmly connected.If this error indication persists, contact yourservice representative.A voltage error (critical) wasdetected.Contact your service representative.A power supply(ies) failed tooperate.Contact your service representative.Flashing inamberA power alarm was detectedin a power supply unit.Identify the failed power supply unit and contactyour service representative.A fan alarm was detected. Make sure that the fan units are firmly connected.If this error indication persists, contact yourservice representative.A thermal error (warning) wasdetected.Check internal fans for dust or debris. Alsomake sure that the fan units are firmly connected.If this error indication persists, contact yourservice representative.A voltage error (warning) wasdetected.Contact your service representative.
