3-8 Setting Up Your ServerRequired Tools#2 Phillips screwdriver and flat tip screwdriver are recommended for assembling the rack-mountsystem.Installation ProcedureInstall the server on the rack in the following procedure.IMPORTANT: You cannot install the server into N8540-28F/29F/38FNEC rack.1. Define the position (height) at which the server is installed by using templates.The templates have the same vertical size as the server. Put the templates on the front andrear of the rack to locate them. The installation positions of the core nuts and slide railassembly are specified on the templates.Template (front) Template (rear)Icons showing the positions at whichcore nuts are installed
