Program 14 : Trunk, Basic Setup14-01 : Basic Trunk Data SetupLevel:INDescriptionUse Program 14-01 : Basic Trunk Data Setup to set the basic options for each trunk port. Refer tothe chart below for a description of each option, its range and default setting.Input DataTrunk Port Number 001 ~ 084ItemNo.Item Input Data Description Default RelatedProgram01 Trunk Name Up to 12 characters Set the names for trunks. The trunkname displays on a multiline termi-nal for incoming and outgoing calls.Refer below02 Transmit Level 1 ~ 63(- 15.5 dB ~ + 15.5 dBin 0.5 dB intervals)Use this option to select the CODECgain for the trunk. The option setsthe gain (signal amplification) for thetrunk you are programming.32 (0 dB)03 Receive Level 1 ~ 63(- 15.5 dB ~ + 15.5 dBin 0.5 dB intervals)Use this option to select the CODECgain for the trunk. The option setsthe gain (signal amplification) for thetrunk you are programming.32 (0 dB)04 Transmit GainLevel for Confer-ence and Trans-fer Calls1 ~ 63(- 15.5 dB ~ + 15.5 dBin 0.5 dB intervals)Use this option to select the CODECgain type used by the trunk when itis part of an Unsupervised Confer-ence.32 (0 dB)05 Receive GainLevel for Confer-ence and Trans-fer Calls1 ~ 63(- 15.5 dB ~ + 15.5 dBin 0.5 dB intervals)Use this option to select the CODECgain type used by the trunk when itis part of an Unsupervised Confer-ence.16 (- 8 dB)06 SMDR Printout 0 = No (trunk will not bereported in the SMDRprint out.)1 = Yes (trunk will bereported in the SMDRprint out.)This option can include/excludetrunks from being reported in theSMDR printout.If a trunk is set to No Print Out (set-ting data of 0) any calls made or re-ceived on this line will not be repor-ted in the SMDR printout.107 Outgoing Calls 0 = Deny (No)1 = Allow (Yes)Use this option to allow/prevent out-going calls on the trunk you are pro-gramming.108 Toll Restriction 0 = Restriction Disa-bled (Toll restriction willnot be applied to callson this trunk.)1 = Restriction Enabled(Toll restriction will beapplied to calls on thistrunk.)Use this option to enable/disabledToll Restriction for the trunk. If ena-bled, the trunk follows Toll Restric-tion programming (example: Pro-grams 21-05, 21-06). If disabled, thetrunk is a toll free line.1 21-0421-0521-06SL1100 ISSUE 4.02-108 Program 14 : Trunk, Basic SetupProgram14
