Program 30 : DSS/DLS Console Setup30-03 : DSS Console Key AssignmentLevel:SADescriptionUse Program 30-03 : DSS Console Key Assignment to customize the key assignments for 60-button DSS Consoles. A DSS Console key can have any function with up to eight digits (e.g.,extension number or Service Code).To prevent lamp problems when reassigning DSS Console keys, clearing an extension programmedkey before reassigning it is recommended [Enter key to be cleared + 00 or *00 (If using WebPro orPC Programming, delete the key assignments and upload the change to the system beforeproceeding.)] Without clearing an extension key first, the DSS Console may not show the correct lampdisplay, although the DSS function works correctly.If you are programming the system from the extension to which the DSS Console is connected, eitherby phone or using the WebPro or PC Program, you may need to unplug the DSS and plug it back in toreset the console lamping.Input DataIndex 1DSS Console Number 01 ~ 12Index 2Item No. Key Number Function Number Additional Data01 001 ~ 114 0 ~ 99, #0 ~ #99 (GeneralFunctional Level)*00 ~ *99 (AppearanceFunctional Level)Refer to Table 2-7 FunctionNumber List on page 2-313.Table 2-7 Function Number List[1] General functional level (00 ~ 99, #00 ~ #99)FunctionNumber Function Additional Data LED Indication Note01 DSS/One-Touch Extension Number orany Numbers (up to36 digits)On (Red) : DSS Ext. BusyOff : DSS Ext. Idle, DND External, DNDTransfer, CFW Busy, CFW Noans, CFWBusy/Noans, CFW Both, CFW FL MEFast Blink (Red) : DND Intercom, DNDAll, CFW Imm02 Microphone Key (ON/OFF)On (Red) : Mic OnOff : Mic Off03 DND Key On (Red) : DND Setup04 BGM (ON/OFF) On (Red) : Active05 Headset On (Red) : Headset Operation06 Transfer Key NoneISSUE 4.0 SL1100Programming Manual 2-313Program30
