Program 90 : Maintenance Program90-68 : Side Tone Auto SetupLevel:INDescriptionNote: This program is available only via telephone programming and not through PC Programming.Use Program 90-68 : Side Tone Auto Setup to setup the volume level of Side Tone for each AnalogTrunk Port.This program will change the setting of "PRG 81-07 CODEC Filter Setup for analog Trunk Port" If theAnalog Port is in used or if it is other than a Analog Trunk Port then it will give out the error message.Input DataItemNo.Item Input Data Description Default RelatedProgram01 Adjustment Start Trunk Port Number001 ~ 084This will start the Adjustment of SideTone for each Analog Trunk Port. Ifit is successful it will change thePRG 81-07. If it is successful it willask to change it for all Analog TrunkPort.. If you select to change theSetting All Analog Trunk Port it willchange all the Port in 81-07.No Setting 81-07-0121-01-0521-01-0614-01-0721-06-0621-05-0702 1 digit data Dial (1 dight) This setting will ask to use the digitafter Line is retrieved.0 -ConditionsNoneFeature Cross ReferenceNoneSL1100 ISSUE 4.02-608 Program 90 : Maintenance ProgramProgram90
