Program 11 : System Numbering11-09 : Trunk Access CodeLevel:INDescriptionUse Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access codecan be set from 1 ~ 4 digits which is defined to type 3 and 4 in Program 11-01. This is the codeextension users dial to access Automatic Route Selection (ARS/F-Route). The Individual TrunkAccess Code is used when Trunk Group Routing is desired for an outgoing line.Caution!The digit 9 is defined in Program 11-01 as Dial Type ( ) with the Number of Digits Required set to ( ). If you change thetrunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.Input DataItemNo.Item Input Data Description Default RelatedProgram01 Trunk AccessCodeDial (Up to four digits) Use this program to assign the trunkaccess code. This is the code exten-sion users dial to access AutomaticRoute Selection (ARS/F-Route).9 • 11-01 :SystemNum-bering• 14-01 ~07 : Ba-sicTrunkDataSetup• 14-05 :TrunkGroup• 14-06 :TrunkGroupRouting• 21-02 :TrunkGroupRoutingfor Ex-tensionsSL1100 ISSUE 4.02-68 Program 11 : System NumberingProgram11
