Program 10 : System Configuration Setup10-63 : DHCP Client SettingLevel:INDescriptionUse Program 10-63 : DHCP Client Setting to set the data of DHCP Client.Input DataItemNo.Item Input Data Description Default01 DHCP Client Mode 0 = Disabled1 = EnabledIf you are using IP phones/trunks it is rec-ommended to not use the DHCP clientfunction, a static IP address would be pre-ferred. If you are going to still use theDHCP client function then the DHCP serv-er should be setup so that the same IP ad-dress is always provided to the system.When changing this program a systemreset is required.1ConditionsNoneFeature Cross ReferenceNoneSL1100 ISSUE 4.02-56 Program 10 : System Configuration SetupProgram10
