Program 26 : ARS Service26-02 : Dial Analysis Table for ARSLevel:INDescriptionUse Program 26-02 : Dial Analysis Table for ARS to set pre-transaction tables for selectingAutomatic Route Selection (ARS/F-Route).• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.Input DataDial Analysis Table Number 1 ~ 400ItemNo.Item Input Data Default RelatedProgram01 Dial Maximum of 16 digits (0 ~ 9, *, #, @) No Setting02 ARS Service Type 0 = No Service (Call Restricted)1 = Route to Trunk Group2 = Select F-Route Access003 Additional Data/ServiceNumberIf Service Type 1 (in 26-02) : Select Trunk GroupNumber0 ~ 25 (Trunk Group Number 0 = No Route)101 ~ 104 (Networking ID) (V1.5 Added)If Service Type 2 (in 26-02) :F-Route Time Schedule Not Used = 0 ~ 100(F-Route Table Number).Refer to Program 44-05 : ARS/F-Route Table onpage 2-394.F-Route Time Schedule Used = 0 ~ 100(F-Route Selection Number).Refer to Program 44-04 : ARS/F-Route Selectionfor Time Schedule on page 2-393.0 44-0444-0504 ARS Class of Service 0 ~ 160 = No ARS Class (Call Restricted)005 Dial Treatment for ARS 0 ~ 15 007 Network Specified ParameterTable0 ~ 16 0 26-12ConditionsNoneFeature Cross Reference• Automatic Route Selection (ARS/F-Route)SL1100 ISSUE 4.02-306 Program 26 : ARS ServiceProgram26
