Program 35 : SMDR Account Code Setup35-01 : SMDR OptionsLevel:INDescriptionUse Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording) optionsfor each of the eight SMDR ports. Refer to the following chart for a description of each option, itsrange and default setting.Input DataSMDR Port Number 1 ~ 2ItemNo.Item Input Data Description Default01 Output Port Type 0 = No Setting (SMDRdisabled)3 = LAN (SMDR enabledand sent out of the LANport.)This option specifies the type of connec-tion used for SMDR. The baud rate for theCOM port should be set in Program10-21-02 or 15-02-19.SMDR port1 : 3SMDR port2 : 003 Header Language 0 = English1 = German2 = French3 = Italian4 = SpanishSpecify the language in which the SMDRheader should be printed.004 Omit Digits 0 ~ 24 (0 = Not applied) The number of digits entered in this optiondoes not print on the SMDR report. For ex-ample, if the entry is 10, the first 10 digits auser dials do not appear on the SMDR re-port.005 Minimum Digits 0 ~ 24 (0 = Not applied) Outgoing calls must be at least this num-ber of digits for inclusion in the SMDR re-port.006 Minimum Call Dura-tion0 ~ 65535 seconds (0 =All)The duration of the call must be at leastthis time to be included on the SMDR re-port.007 Minimum Ring Time(For Incoming Calls)0 ~ 65535 seconds (0 =All)A call must ring for at least this time to beincluded on the SMDR report.008 Format Selection 0 = Format1 Type (NorthAmerica)1 = Format2 Type (Over-seas)0ConditionsNoneSL1100 ISSUE 4.02-348 Program 35 : SMDR Account Code SetupProgram35
