Time savers for making calls 41P0908510 Issue 02 Enterprise Edge Feature Programming Telephone GuideDisplaysUsing Saved Number Redialƒfl‡You can save the number of the external call you are on (provided you dialed thecall) so that you can call it again later. Each telephone can save one number at a timewith Saved Number Redial, not one number for each line.Saving a numberPress ƒfl‡ while you are on the call.Saved Number Redial records a maximum of 24 digits.Continue entering the number you want to program.You can change the number by pressing BKSP or√ . When you are finished, press˙ or OK.Enter the telephone number you want to programexactly as if you were dialing it normally. When you arefinished, press ˙ or OK.You have entered a code outside the code range(01-70 for system, 71-94 for personal).There is no number stored on the speed dial code youhave dialed.If you want to program a line or line pool selection forthis speed dial number, select the line or line pool.Otherwise, enter the telephone number exactly as ifyou were dialing it normally. When you are finished,press ˙.If you want to program a line or line pool selection forthis speed dial number, select the line or line pool.Otherwise, enter the telephone number you want toprogram exactly as if you were dialing it normally.When you are finished, press OK.There is no line associated with the speed dial numberyou are trying to use. Select a free external line or linepool and enter the speed dial feature code again.The system cannot dial the number stored. Reprogramthe number.For other displays, see Common feature displays on page 125.TipYou can copy a number onto an autodial button using Saved Number Redial.01:9___CANCL BKSP OKEnter digitsQUIT OKInvalid codeNo number storedProgram and HOLDProgram and OKQUIT OKSelect a lineUnknown number
