P0908510 Issue 02 Enterprise Edge Feature Programming Telephone GuideCustomizing your telephoneFinding out what a button does using Button Inquiryƒ•‚You can check the function of any line, intercom, or programmed button on yourEnterprise Edge telephone by pressing ƒ•‚. On the M7100 telephoneButton Inquiry shows your internal number followed by the function assigned toyour single memory button.DisplaysMaking the display darker or lighter using Contrast adjustmentƒ•‡1. Press ƒ•‡.2. Press a number on the dial pad to choose the contrast level you prefer.3. Press ˙ to save your setting.On a two-line telephone, you can use the UP and DOWN display buttons to adjust thecontrast. The number of contrast levels available varies from one telephone modelto another.The display shows the number and name of the line.Press SHOW to view the redirection status of the line.Press £ or press VIEW‚ or ·VIEW to view a numberthat is too long to fit on the display. Press ˙or OK when you are done.The display shows the directory number of thetelephone, and the assigned name. Press NEXT to seethe first line assigned to ring at the intercom button.The name of the feature assigned to a button isdisplayed when you press the button. Press £ orSHOW for additional information.Press the button you want to check. Press ƒor EXIT when you are finished.For other displays, see Common feature displays on page 125.10061 SHOW OK123456789012345...VIEW‚ OK221 NEXT VIEW‚SHOW OKPress a buttonEXIT
