96 Using System featuresEnterprise Edge Feature Programming Telephone Guide P0908510 Issue 02Each schedule can have its own configuration of a Service which worksindependently of automatic start and stop times. For example, there may be aversion of Restriction service called Night Schedule that prevents anyone frommaking long distance calls. But calling it Night Schedule does not mean it can onlybe used with a schedule. You can turn the Night Schedule for Restriction Serviceon or off as needed any time of the day or night. If you decide to run a service on aschedule, the system uses the start and stop times used for that schedule.Turning Services on and off using feature codesThe master control for services is accessed from the Unified Manager. Day-to-dayuse of Services is controlled using the following feature codes.To turn a Service on:1. Enter the appropriate feature code from a control telephone.2. Press NEXT to move through the schedules until the display shows the versionof the service you want to be turned on.3. Press OK to select the setting, or press QUIT to exit the feature without makingany changes.To turn a Service off:1. Enter the appropriate feature code from a control telephone.Viewing the active Services from a two-line display telephoneWhen a Service is active, the control telephone display reads Services ON.1. Press LIST. The display shows the first active Service and the schedule that isin use.ƒ°‡⁄ Turns on Ringing service. When used at thedirect-dial telephone, it activates the alternatedirect-dial telephone (extra-dial telephone).ƒ£°‡⁄ Turns off Ringing service.ƒ°‡¤ Turns on Restriction service.ƒ£°‡¤ Turns off Restriction service.ƒ°‡‹ Turns on Routing service.ƒ£°‡‹ Turns off Routing service.Do not confuse activating Normal service with canceling a Service.Setting a Service to Normal is not the same as canceling a Service using afeature code. If you set the Service to Normal, the normal version of aService overrides any automatic schedule and remains in effect until youmanually cancel it. If you cancel the Service, you return to the automaticschedule.
