Customizing your telephone 77P0908510 Issue 02 Enterprise Edge Feature Programming Telephone GuideEnterprise Edge default button assignmentsDuring Startup, the Enterprise Edge installer chooses one of the available templates.Default features are assigned automatically to the programmable buttons onEnterprise Edge telephones, and vary with the template and the telephone. Thedefault features are listed in the following tables in this chapter.Rules of default button assignmentLine and Intercom buttons are assigned by default templates and can be changed inprogramming. Handsfree/Mute and answer buttons are not assigned by default. Ifthese features are defined, however, they are automatically assigned to specificbuttons, as described on this and the following page. None of these buttons can beassigned to M7100 telephones.The Handsfree/Mute feature appears on the bottom right-hand button, moving theIntercom button(s) up one position.Each telephone can have up to eight Intercom buttons. They appear above theHandsfree/Mute button at the bottom right-hand position on your telephone.Each telephone can have up to four answer buttons. They appear above Intercombuttons in the right column and continue up from the bottom in the left column,replacing the features on those buttons.External line buttons appear in ascending line order, starting at the top button in theleft column (the top button on the M7208 telephone). If more than five externallines are assigned to a M7310 telephone, or more than 12 to a M7324 telephone,assignment continues down the buttons on the right column, erasing the features onthose buttons. Line buttons have priority over feature access buttons but notHandsfree/Mute, Intercom, or answer buttons.TipsEnterprise Edge telephones are shipped from the factory with the button capsin place for the PBX template.Please consult your customer service representative to determine the type oftemplate programmed into your system before applying button assignments.
