Forwarding your calls 55P0908510 Issue 02 Enterprise Edge Feature Programming Telephone GuideIf you use ALL to redirect all your lines, it is important that you wait until all the lineson your telephone light up before pressing ˙ or OK. If you press ˙ orOK before all the lines light up, those lines not lit are not redirected.Canceling Line Redirectionƒ£°›1. Press ƒ£°›.2. Select the lines you no longer want to be redirected.Allowing a telephone to redirect callsYou can turn a telephone’s ability to redirect calls on and off.You need to start a Unified Manager session to program this feature. For moreinformation about programming using the Unified Manager, see the EnterpriseEdge Programming Operations Guide.Turning the redirect ring for a telephone on or offYou can program a telephone to ring briefly (200 milliseconds) when a call isredirected on one of its lines.You need to start a Unified Manager session to program this feature. For moreinformation about programming using the Unified Manager, see the EnterpriseEdge Programming Operations Guide.TipThe line chosen for redirecting calls on other lines can be used normally whenit is not busy on a redirected call. To avoid redirection failing because thechosen line is in use, choose a line pool with several lines in it.The system does not check that the number you give for line redirection is avalid one. If you redirect to an invalid number, redirection fails. Using anautodial button to enter the redirection number helps avoid this possibility. Anautodial button used for line redirection must be programmed to use a specificline.TipIf a telephone has redirect ring enabled, it rings briefly for redirected calls onone of its lines even if another telephone set up the line redirection.
