Forwarding your calls / 111P0992640 03 Modular ICS 6.0 System Coordinator GuideCanceling Line RedirectionWhen you are ready to resume service, use this procedure tocancel line redirection.1. Press ²£¡Ý.2. Select the lines you no longer want to be redirected.Allowing a telephone to redirect callsYou can use programming to determine if a set can use theredirect calls feature and turn it on or off.You need the programming template found at the front of thisguide. See Getting started with Norstar on page 13 for moreinformation.1. Press ²¥¥ÛßßÜÝÝ.2. Press ÛÜßÝß (the default System Coordinatorpassword).3. Press ≠ and enter the internal number of thetelephone you want to program.4. Press ≠ twice.5. Press “ four times. The display readsAllow redirect:.6. Press CHANGE to select Y (Yes) or N (No).Tip - The system does not check that the number you give forline redirection is a valid one. If you redirect to an invalidnumber, redirection fails. Using an autodial button to enter theredirection number helps avoid this possibility. An autodialbutton used for line redirection must be programmed to use aspecific line.
