Answering calls / 59P0992640 03 Modular ICS 6.0 System Coordinator GuidePutting a conference on holdYou can put a conference on hold, allowing the other twopeople to continue speaking to each other by pressing ³.You can reconnect to the conference by pressing either of theheld line buttons. For the M7100 telephone, press ³.Splitting a conferenceYou can talk with one person while the other person is on hold.You can activate this feature on all Norstar and BusinessSeries terminals except for M7100 or T7100 models.1. Press the line button of the person you want to speak to.The other person is automatically put on hold.On an M7100 or a T7100 set:1. Press ²£Ü. The first party is on hold.2. Press ³, if necessary, to switch parties.You can re-establish the conference.1. Press ²Ü.2. Take the held call off hold. This is not necessary.Removing yourself from a conferenceYou can remove yourself from a conference, and connect theother two callers through your Norstar system.1. Enter the Transfer feature code ²àâ.When you remove yourself from a conference using theTransfer feature, and both callers are from outside your
