Using System features / 227P0992640 03 Modular ICS 6.0 System Coordinator GuideThe Run/Stop symbol (fl) uses one of the 24 spaces in anautodial or speed dial sequence.You can include up to three Run/Stop commands in a dialingstring. The system ignores a fourth Run/Stop, and any digits orcommands that follow it in a programmed dialing sequence.Wait for Dial Tone²¡âÝWait for Dial Tone causes a sequence of numbers to pauseuntil dial tone is present on the line before continuing to dial.This is useful if you must dial a remote system and then waitfor dial tone from that system before dialing the rest of yournumber.The Wait for Dial Tone symbol (‡) uses two of the 24 spacesin an autodial or speed dial sequence.DisplaysUsing pulse dialing for a callIf your external telephone lines use pulse dialing, you cantemporarily switch to tone dialing by pressing £ afterselecting the line. Tone dialing allows your Norstar telephonecommunicate with devices and services that respond to tonesignals, such as automatic switchboards, and fax or answeringmachines.You have entered a code that can beused only in a programmed autodial orspeed dial sequence, not on a call youdial directly. Programmed Release andRun/Stop are for use in programmeddialing sequences only.Invalid code
