250 / Common feature displaysModular ICS 6.0 System Coordinator Guide P0992640 03You have tried to make, receive or pick upa call when no line button was available.Some features require you to have abutton free. Releasing calls can free up linebuttons.The feature you tried to use requires you tobe on an active call at your telephone. Thisdisplay appears when information about acall has been cleared by a system reset.All the lines or line pools available to thetelephone are in use. This display appearswhen you have tried to dial an externalnumber or use a feature that conflicts withthe lines, line pools or prime line used bythe telephone. This must be corrected byyour customer service representative orinstaller.The telephone has been set up to dial anexternal number on a prime line but thetelephone does not have a prime line. Thismust be corrected by your customerservice representative or installer.You have tried to program redirection whilesomeone else is programming redirection.Only one person can program lineredirection at a time.The line you are trying to use for redirectingcalls is for incoming calls only. Choose anoutgoing line.Continue entering digits. Press Ãor BKSP to delete incorrect digits. Press³ or OK when you are finished.You have entered an invalid line pool codeor an invalid destination code.You have selected a line that is private toanother telephone.The destination you have chosen for lineredirection is restricted.No button freeMake calls firstNo free linesNo line selectedIn use:221Incoming only9__QUIT BKSP OKInvalid numberLine deniedRestricted call
