22 / Getting started with NorstarModular ICS 6.0 System Coordinator Guide P0992640 03A map for working in programmingThe tables on the following three pages show the headings thatdisplay when you move through the display menu after pressing²¥¥¯öìéí and entering the password (thedefault password is ë÷éö or ÛÜßÝß).The default Basic password (õêé orÛÛàÝÛ) can be used with a limited number of featurecodes, including ¥¥æé÷ä and the codes for turningcall services on and off. For more information, see Usingpasswords on page 214.Customize each telephone on the system. Youcan change where a call is forwarded, give atelephone a name, or allow certain features to beused at a telephone. You can change the buttonprogramming on any telephone on the system.Program names for each line.Turn services on or off: Ringing service,Restriction service, and Routing Service.Program up to 255 different telephone numbersso internal users can dial them with a three-digitcode (001-255).Change or erase the password you use forprogramming, or the one you use for Call log. Onan XC system, you can change the Companionportable telephone registration password.Change the time, date, or both.Access the headings that define Hunt Groups,Hospitality services. Enter the BusName, whichdisplays on caller ID lines.On a MICS-XC system, access registrationrecords for Companion portable telephones soyou can disable or enable the sets.Terminals&SetsLinesServicesSys speed dialPasswordsTime&DateSystem prgrming
