Transferring calls / 95P0992640 03 Modular ICS 6.0 System Coordinator GuideCanceling a transferYou can reconnect to the person you are trying to transfer atany time before the transfer is complete.1. Press ²£àâ or CANCL.2. If you are not reconnected to your original call, press ¨and then press the line key of the original call, which isnow on hold.DisplaysYou are talking to the person you want totransfer the call to. Press RETRY if you decideto transfer the call to someone else. Press¨ or JOIN to transfer the call.The person to whom you tried to transfer acall did not answer. Press CALLBACK or theflashing line button to reconnect to the call.On the 7100 sets, lift the receiver.The person to whom you tried to transfer acall has Do Not Disturb active on theirtelephone. Press JOIN to transfer the callanyway. Press RETRY to transfer the call tosomeone else. Press CANCL or the flashingline button to reconnect to the call (on theM7100 or T7100 sets, press ²£àâ).You entered an invalid internal number.Press RETRY and enter the number again.The external caller you were transferringhung up before the transfer was complete.Press JOIN to transfer the call on line 001 totelephone 221. Press RETRY if, after talkingto the person at extension 221, you decide totransfer the call to someone else.The telephone to which you are trying totransfer a call is out of service.221>222CANCL RETRY JOIN221 no replyCALLBACKDo not disturbCANCL RETRY JOINInvalid numberCANCL RETRYLine001 hung upLine001>221CANCL RETRY JOINNot in serviceCANCL RETRY
