OHAUS Explorer EX124 Instruction Manual

Also see for EX124: Service manual Instruction manual Instruction manual

Contents

EN-120 EXPLORER BALANCESSpan Calibration and User Calibration:ContentHEADER 1HEADER 2HEADER 3HEADER 4HEADER 5TIMERESULTRESULTRESULTRESULTRESULTSpan CalibrationCompany NameAddress 1Address 2Address 3Address 412/6/2010 4:33 AM---Span Calibration---Balance ID:Balance Name: EXPLORERUser Name:Project Name:New Calibration: 1999.99 gOld Calibration: 2000.00 gDifference: 0.01 gWeight ID__________Signature:____________--------------End---------------User CalibrationCompany NameAddress 1Address 2Address 3Address 412/6/2010 4:36 AM---User Calibration---Balance ID:Balance Name: EXPLORERUser Name:Project Name:New Calibration: 1999.99 gOld Calibration: 2000.00 gDifference: 0.01 gWeight ID__________Signature:____________--------------End--------------The CAL TEST printout is automatically printed when a Calibration Test is performed.ContentHEADER 1HEADER 2HEADER 3HEADER 4HEADER 5TIMERESULTRESULTRESULTRESULTRESULTCalibration TestCompany NameAddress 1Address 2Address 3Address 412/6/2010 4:33 AM---Calibration test---New Calibration: 3999.97 gOld Calibration: 4000.00 gDifference: 0.03 gWeight ID__________--------------End--------------7.3 Output FormatThe Result Data, and G/N/T data, is output in the following format.Field: Label 1 Space 2 Weight 3 Space 2 Unit 4 Space Stability 5 Space G/N 6 Space Term.Characters 7Length: 1 11 1 1 ≤ 1 ≤ 1 ≤ 3 0 ≤ 81. In certain cases, a Label field of up to 11 characters is included.2. Each field is followed by a single delimiting space (ASCII 32).3. The Weight field is 9 right justified characters. If the value is negative, the “–“ character is located at theimmediate left of the most significant digit.4. The Unit field contains the unit of measure abbreviation up to 5 characters.5. The Stability field contains the “?” character if the weight reading is not stable. The Stability field and thefollowing Space field are omitted if the weight reading is stable.6. The G/N field contains the net or gross indication. For net weights, the field contains “NET”. For grossweights, the field contains nothing, “G” or “B”, depending on the GROSS INDICATOR menu setting.7. The Termination Characters field contains CRLF, Four CRLF or Form Feed (ASCII 12), depending onthe LINE FEED menu setting.