EXPLORER BALANCES EN-454.6 FillingThis application allows the user to slowly fill a container to a pre-determined target weight. The progress bardisplays the filling status, and within 10 percent of the target value the progress bar converts to fine resolution(+/– 10%) for accurate results.In the upper left portion of the home screen, select Filling.The default (or last) Target weight is displayed. Place objects on the pan to begin.The FILLING Home screenMain Display LineSecond Display LineReference FieldsApplication ButtonsFunctions Application IconThe progress bar displays the filling status, and within 10 percent of the target value, the progress bar convertsto fine resolution display.4.6.1 Edit SettingsTo view or adjust the current settings:Touch the Edit Settings button.The Settings screen appears:Settings available: Target WeightFunctions Available: Recalculate Target Weight,Return to ApplicationEstablish a Target WeightEach time a new item is used for filling, the Target Weight(fill-to weight) must be established.There are two (2) methods to establish the Target Weight:1. The actual Target Weight is known; or2. The Target Weight can be derived from a sample.Establish using a Known Target WeightThe current Target Weight appears on the Settings screen, onthe Target Weight button. (See above.)To adjust the Target weight value directly,touch the Target Weight button.A numeric input window appears.Enter the desired Target Weight, then press Done.The display returns to the previous screen with the new valuehighlighted.Press Return to Application to go to the Filling home screen.