EN-44 EXPLORER BALANCES4.5.5 Statistics for Dynamic WeighingUse the Statistics function to compare a number of samples and examine the relative deviation of the samplesalong with other statistical data. A minimum of three samples is required.Statistics can be determined manually (Manual mode, with key press after each step) or automatically(Automatic Mode: weights are automatically recorded when stable). To use the statistics function, enable it firstin the Application Setup menu.Application SetupFirst, Enable StatisticsTouch the SetupIcon wrench toenter Setupmenu.Press Statistics.Choose eitherManual orAutomaticmode, thenpress Done.Accumulating Displayed Values & Viewing Data – ManualOnce Statistics is enabled, two buttons appear on the Application screen: Statistics and Accumulate.To add the sample to the data set, place the item on the panand press Accumulate.When stable, the Statistics button momentarily lights to showthe item is added to the set and the data set quantity incrementsby one.Continue adding items and pressing Accumulate to build thestatistical data setAt any time, press the Statistics button to view the results.The Statistics Results screenPress Print to send to the enabled COM portPress Close to return to the Application home screenwith the current statistics.Press Clear Data to clear the results and return to theApplication home screen.Statistics – AutomaticStatistics Automatic mode is similar to manual mode (above) except the first stable weight is automaticallycaptured. Thus the Accumulate button is not used.