EN-26 EXPLORER BALANCES4.2.3 Parts Counting – CheckThis feature permits establishing a set quantity of pieces as criteria for similar items that can be quickly checkedagainst a sample.Press theSetup(wrench)button to enterthe CountingSetup menu.ChangeCountingMode toCheckCounting.The PARTS COUNTING – Check Home screenMain Display LineSecond Display LineReference FieldsApplication ButtonsFunctionsThe default (or last) Average Piece Weight (APW) isdisplayed. Place objects on the pan to display theCheck Status (number of pieces).4.2.2.1 Edit Settings: To use the Parts Counting-Check mode,the Over Limit and Under Limit values must be set.The Average Piece Weight and standard sample size can alsobe set. Follow these steps:Touch the Edit Settings button. The Settings screen appears.The buttons for APW, Samples, Over Limit and Under Limitshow default (or previously set) values. To change any value,touch the button. A keyboard screen appears.(See keyboard screens, next page.)To set a new average piece weight, press theRecalculate APW button.A new screen appears with the message:Place 30 pieces. Press Accept(Default is 10 pieces, but message matchesnumber of pieces in Samples button.)After following these instructions, press Return to Applicationon the main Edit Settings screen.
