EN-64 EXPLORER BALANCES4.10.3 Measuring the Density of a Buoyant Material Using WaterPress the Setup button (the wrench) to open Settings screen.Confirm the following Setups are selected:9 Density Type: Solid9 Liquid Type: Water9 Porous Material: OffPress Done to return to the Density Determination home screen.Follow the same procedure as Solid Material above, except inDensity Determination step 2, push the sample down into theliquid until it is fully submerged.4.10.4 Measuring the Density of a Solid Using an Auxiliary LiquidTo enable this feature, enter the Density Setup menu and select the following:Density Type: Solid; Liquid Type: Other; Porous Material: Off. See Application Setup.The DENSITY DETERMINATION – SOLID Home screenMain Display LineSecond Display LineReference FieldsApplication ButtonsFunctions Application IconConfirm the default values displayed (Liquid Density, etc) arecorrect.To edit the default values, touch Edit Settings and theapplication Settings screen appears.Settings available: Liquid DensityFunctions Available: Return to ApplicationTo adjust the Liquid Density value, touch the Liquid Densitybutton.Measure the actual liquid density of the Density setup and enterit.A numeric input window appears.Key in the density in g/cc, then press Done.The display returns to the previous screen with thenew value highlighted.