EN-52 EXPLORER BALANCES4.8 FormulationUse this application for compounding and recipe making. The number of components can be 2 to 99.Formulation has two available modes of operation: Free Formulation and Recipe Formulation.4.8.1 Free Formulation (default)This mode of Formulation allows the user to freely add components. A filler material is asked for at the end.In the upper left portion of the home screen, select Formulation.The FREE FORMULATION Home screenMain Display LineSecond Display LineReference FieldsApplication ButtonsFunctions Application IconTo start the compounding process, press Begin Formulation.A prompt says Place component 1 then press Accept.The item weight is displayed on the main display Line.Place the first ingredient on the pan (or in a tared container).Press Accept to store the first component.A prompt says Place item 2. Press Accept.Continue adding components and pressing Accept to store theweight of the individual components until the formula iscomplete.The Total line shows the total weight of all the components.Press Print at any time in the process to print the recipe.Then press End Formula.The display may prompt for a Filler material.If the formula calls for a filler material, press OK.A popup message window appears, prompting for theFiller Material to be added.Add the filler if needed, then press Accept.(If no filler is needed, press Accept without adding filler.)The results are then displayed in a pop-up window.Free - Formulation ResultsPress Print to send data to the enabled COM portPress Close to close the Results window and return to theApplication home screen
