CS240/CS231 4-71Basic copy operations 44.13 Selecting a folding settingIf options are installed, copies can be folded before being fed out. The following folding settings are available.The available settings differ depending on the options that are installed.2 NoteCS240: Copies can be folded in half or in three or bound at the center only if Finisher FS-608 is installed.CS231: Copies can be folded in half or bound at the center only if finisher FS-608 is installed or finisherFS-519 is installed with the saddle stitcher attached.Copies can be folded in three only if Finisher FS-608 is installed.Setting Description Compatible modelsCS240 CS231Half-Fold Select this setting to fold copies in half before feeding them out. (Re-fer to page 4-72.)FS-608 FS-608FS-519 +SaddleStitcherCenter Staple &FoldSelect this setting to staple copies at two places along the center,then fold the copies in half before feeding them out. (Refer topage 4-75.)FS-608 FS-608FS-519 +SaddleStitcherTri-Fold Select this setting to fold copies in three before feeding them out.(Refer to page 4-78.)FS-608 FS-608
