13 Utility mode13-20 CS240/CS231!DetailFor details on the "Administrator Security Level" parameter, refer to "Security settings" on page 13-32.For details on the default settings and the factory default settings, refer to page 3-29.To change the default settings for Fax/Scan mode, press the [Fax/Scan] key, enter Utility mode, andthen select a setting for this parameter.Scan/Fax settingsPrinter settingsChange passwordChange e-mail address2 Note[Change E-Mail Address] appears only if the "Administrator Security Levels" parameter in Administratormode is set to "Level 2"Parameter DescriptionJPEG Compression Level Specify settings for scanning. For details, refer to the User manual – NetworkScanner Operations.Black Compression LevelTWAIN Lock TimeDefault Fax/Scan SettingsCompact PDF Compression LevelParameter DescriptionBasic Settings Specify settings for printing. For details, refer to the User manual – Print Op-erations.Paper SettingsPCL SettingsPS SettingPrint Reports The Print function settings can be printed as a report. For details, refer to theUser manual – Print Operations.DescriptionThe password for the user who is currently logged on can be changed.After typing in the current password, type in the new password.This parameter is available when "User Authentication" is set to "ON (MFP)".DescriptionThe e-mail address for the user who is currently logged on can be changed.This parameter appears only when a user other than a public user is logged on.
