3 Before making copies3-48 CS240/CS2313.7 Loading paper into the LCT1 Open the upper door.2 Lift up the paper take-up roller, and then load the paper intothe tray.– Load the paper into the tray so that the side of the paperto be printed on (the side facing up when the package wasunwrapped) faces down.– Load letterhead paper so that the side to be printed onfaces up.? How is curled paper loaded?% Flatten the paper before loading it.? How many sheets of paper and other media can beloaded?% Do not load so many sheets of plain paper that the top ofthe stack is higher than the , mark.3 Lower the paper take-up roller, and then close the upper door.2 ReminderFor details on selecting the size and type of paper loaded in the LCT, refer to "Copy paper" on page 8-3.2 NoteIf the machine is turned off, the bottom plate cannot be raised. When loading paper into the LCT, besure that the machine is turned on with both the main power switch and the [Power] (auxiliary power)key.
