3 Before making copies3-46 CS240/CS2313.5 Loading paper into tray 31 Pull out tray 3.2 Lift up the paper take-up roller, and then load the paper intothe tray.– Load the paper into the tray so that the side of the paperto be printed on (the side facing up when the package wasunwrapped) faces up.– Load letterhead paper so that the side to be printed onfaces down.? How is curled paper loaded?% Flatten the paper before loading it.? How many sheets of paper and other media can beloaded?% Do not load so many sheets of plain paper that the top ofthe stack is higher than the , mark.3 Lower the paper take-up roller, and then close tray 3.2 ReminderFor details on selecting the size and type of paper loaded in tray 3, refer to "Copy paper" on page 8-3.Do not load tray 3 with paper of a size other than that previously specified.Be careful not to touch the surface of the paper take-up roller with your hands.2 NoteTo change the size of paper loaded in tray 3, contact your service representative.To print on OHP transparencies and envelopes, use the bypass tray.
