CS240/CS231 13-15Utility mode 1313.3 Specifying user settingsThis section describes the function and main registration parameters that can be specified after pressing the[Utility/Counter] key, then touching [User Settings].System settingsLanguage SelectionMeasurement Unit SettingsPaper Tray Settings2 Note"LCT" appears for "Auto Tray Selection Settings" only when the optional LCT is installed.Auto Color Level AdjustmentDescription Default SettingSelect one of the following as the language in which messages appear in the touch pan-el.English, French, Italian, German, Spanish, JapaneseEnglishDescription Default SettingSelect one of the following as the measurement units in which values are displayed inthe touch panel.mm (Numerical Value), inch (Numerical Value), inch (Fraction)mm (Numerical Value)Parameter Description Default SettingAuto Tray SelectionSettingsSelect the paper trays that are selected automatically whenthe "Auto" Paper setting is specified. In addition, specify thepriority of the paper trays when the auto tray switch operationis performed.Tray 1 % Tray 2 % Tray 3 %Tray 4 % LCT**Appears only when theLCT is installed.Auto Tray SwitchON/OFFSelect whether or not a paper tray loaded with paper of thesame size is selected automatically when a paper tray thatwas selected manually becomes empty while printing copies.RestrictNo Matching Paper inTray SettingSelect the operation that is performed when there is no paperof the corresponding size in the specified paper tray.• Stop Printing (Tray Fixed):The machine stops operating.• Switch Trays (Tray Priority):Whether or not the specified paper tray contains paper ofthe corresponding size is determined and, if it does not,a different paper tray is selected if it contains paper of thecorresponding size.Stop Printing (Tray Fixed)Print Lists Select the paper tray used for printing lists, such as the salescounter and consumables indicators.Tray1, 1-SidedDescription Default SettingAdjust the reference level for detecting a color or black-and-white document when the"Auto Color" setting is selected. The reference level can be set to one of 5 settings.Standard (3)
