9 Application functions9-68 CS240/CS2319.17 Adjusting the image to fit the paper ("Image Adjust" settings)When the copy paper is larger than the original document, copies can be made with the document imagecentered and enlarged to fill the paper.The image can be adjusted in any of the following ways.1 Position the document to be copied.– For details on positioning the document, refer to "Feeding the document" on page 4-8.– If "Full Size" or "Center Zoom" is to be set, position the document on the original glass.2 Touch [Application], and then touch [Image Adjust].– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes tothe settings are canceled.The Image Adjust screen appears.Setting DescriptionFull Size The area that contains the entire image is centered and enlarged to the size of thepaper.Center Zoom The image is enlarged to the size of the paper so that the paper is filled. However,some parts of the image may be lost.Centering The image is centered in the paper without being enlarged.Full SizeCenter ZoomCentering
