5 Additional copy operations5-8 CS240/CS2315.3 Interrupting a copy job (Interrupt mode)The current jobs can be temporarily interrupted so a document can be copied with different copy settings.This is convenient for quickly making a copy.!DetailFor details on making a copy after printing of the current job is finished, refer to "Increasing printingpriority" on page 12-16.1 Position the document to be copied.– For details on loading the document, refer to "Loading the document into the ADF" on page 4-8.2 Press the [Interrupt] key.– If a job is being printed, the message "The job is stopping."appears.The indicator on the [Interrupt] key lights up in green andprinting of the current job stops.? What settings are selected when the [Interrupt] key ispressed?% When the [Interrupt] key is pressed, all functions andsettings are reset to their defaults.? Why is the [Interrupt] key not available?% The [Interrupt] key cannot be pressed while an original isbeing scanned.3 Select the desired copy settings.4 Press the [Start] key.Printing for the interrupting job begins.5 After the interrupting job has finished printing, press the [Interrupt] key.The indicator on the [Interrupt] key goes off.The copy settings return to those specified before printing was interrupted.2 NoteIf the interrupting job is cancelled, printing for the interrupted job automatically restarts.
