6 Troubleshooting6-48 CS240/CS231Clearing a paper misfeed in Finisher FS-608This procedure describes the operations to be performed along the paper path where paper misfeeds mayoccur.Depending on the selected Finishing settings, the paper path changes, resulting in different locations in thefinisher where paper misfeeds may occur.1 Open the cover for the horizontal transport unit, and then remove any misfed paper in the horizontaltransport unit.– Do not forcefully push or pull the sensor pin in thehorizontal transport unit, otherwise the horizontal transportunit may be damaged.2 Open the machine’s front door.3 Lower guide lever FN2, and then remove any paper.Sensor pin
