3 Before making copies3-30 CS240/CS231Scanning during warm-up1 Press the [Power] (auxiliary power) key.– For details on turning on the machine, refer to "Turning off the machine" on page 3-31.The indicator on the [Start] key lights up in orange.After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] keylights up in blue.2 Check that the message "Warming up. Ready to scan." appears on the touch panel.3 Position the document to be copied.– For details on positioning the document, refer to "Feeding the document" on page 4-8.4 Specify any other desired copy settings.5 Using the keypad, specify the desired number of copies.– For details on specifying the number of copies, refer to "General copy operation" on page 4-3.6 Press the [Start] key.The document is scanned, and the job is added to the list of queued jobs.7 Check that the document has finished being scanned, and then position the next document.8 Specify new copy settings and the desired number of copies, and then press the [Start] key.– If the "Copy Operating Screen" parameter in Utility mode was set to "Yes", touch [Next Copy Job]to display the Basic screen.– After the machine has finished warming up, the jobs will automatically be printed in the order thatthey were queued.? How can the job being printed be stopped?% Press the [Stop] key. For details, refer to "Temporarily stopping scanning/printing" on page 4-81.!DetailWhile the machine is warming up to begin printing after it is turned on using the [Power] (auxiliary power)key, copy settings can be specified and a document can be scanned to reserve a copy job. After themachine has finished warming up, the copies are automatically printed.The print order can be changed or jobs can be deleted from the Detail screen of a job from the CurrentJobs list in the Job List screen. For details, refer to "Managing jobs" on page 12-3.
